MILTECH 300
Military Grade USB 3.1 Smart Hub on Board

Key Features

Product Type:USB
Management:Managed
Ports:
1 x USB3.1/USB2 upstream port
5 x USB3.1/USB2 downstream ports
1 x Ethernet 10/100/1000BT port via USB to LAN Bridge
1 x IO port for I2C/SPI/GPIO/External Power Input
Connectors:
Power: I/O
LAN: SAMTEC
USB: SAMTEC
Designed to Meet:MIL-STD-810 | MIL-STD-461 | IP68
Dimensions:2.87" X 1.5" X 0.43"73mm X 38mm X 11mm
Weight:0.85oz24.2g
Operating Temp.:-40°C to 85°C
Special Features: Battery charge
The MILTECH 300 is a USB 3.1 compatible USB hub on board (HoB) that has five (5) USB 3.1 ports, one (1) gigabit Ethernet port, and a dedicated IO port.

Custom Designed Solutions

For all your requirements, we’ll custom design a solution for your needs

CONTACT US TODAY

Standard Configurations

Model Description
1-300-000 Military Grade USB 3.1 Smart HUB On Board
MILTECH 300 Additional configurations available
  • 1-CP300-000 1-CP300-000 MILTECH300 cooling base plate

Description

The MILTECH 300 is a board-level USB hub that enables connectivity and communication between multiple USB devices and the main compute device. Thes 6 USB 3.1 ports support both battery charging functionality and a regular USB3.1 data path. A dedicated IO port is I²C, External Power, and GPIO compatible. The internal Ethernet interface allows to communicate with upstream devices over a standard Ethernet network, further extending the flexibility of the hub and attached USB devices.

The MILTECH 300-HoB has a wide input range and up to 2A downstream power per port for either charging of powering devices. It supports the four most popular battery charging profiles (DCP, CDP, SDP and custom profiles) to power and charge USB devices including: portable handhelds, storage, sensors, human interface devices and GPS. MILTECH 300-HoB is designed to withstand MIL-STD-810 environmental compliance and MIL-STD-461 EMI/RFI compliance when installed in an appropriate chassis.

Tailored Products to Meet Your Requirements

mots

Modified Off The Shelf Solutions

All of our products can be configured to your specific requirements. Customers are invited to work with a design engineer to define the output, input range, protection limits and dimensions of the power solution which best meets their project needs. This can frequently be accomplished without NRE. Use the contact form to submit a request, or contact us at (603) 267-8865 to discuss your requirements. Configurations created for specific requirements will be assigned a new variant part number.

Learn More

Enercon Technologies Europe AG

Gewerbestrasse 6
Cham, 6330
Switzerland

P: +41-41-740-4554

This email address is being protected from spambots. You need JavaScript enabled to view it.

Created by Mark Media Group